Civil Engineering Materials

Specifications and properties

Main applications and applicable Item No.

Location Construction method AN060 AN120 AN160 AN200 AN300 AN400 AN500 AN800 AP080 AP110
Port and Harbor Works Prevention of soil draw-out
for embankment
           
Prevention of scouring for
wave dissipating blocks, etc
             
River Levee erosion prevention              
Riverbed erosion prevention              
Drained lands
/landfills
/developed lands
Soft ground stabilization and
trafficability
           
Horizontal drain for
embankment
             
Underdrainage            
Roads/sidewalks Embankment on soft grounds            
Blocking layer              
Horizontal drain for
embankment
             
Crack prevention for overlay
construction method
                 
Separation for water
permeable pavement
             
Filter for underground
seepage method
           
Agricultural lands
/cultivated lands
Drainage channel erosion
prevention
           
Farm roads              
Ground construction Water permeability coefficient              
Golf courses Soil layer separation and
horizontal drainage.
         
Waste repository sites
/dams/reservoirs
Seepage control layer
protection and reverse
surface drainage
         
Block lining erosion
prevention
               
Developed lands
/roads
Base materials for temporary
diversion channels
               
Railways Protective materials for mud-
pumping preventing method
and drainage materials
             

Properties [catalog values]

Item No. Specification Weight
(g/m²)
Thickness
(1)
(mm)
Thickness
(2)
(mm)
Tensile
strength
(N/5cm)
Elongation
(%)
Tearing
strength
(N)
Water
permeability
coefficient
(cm/sec)
Burst
Strength
(N)
Color Width
(m)
Roll
length
(m)
*MD *CD *MD *CD *MD *CD Vertical
direction
Horizontal
direction
AN060 W White 1.05/2.1 100 60 0.7 0.5 140 85 55 60 60 60 1×10-1 5×10-1
AN120 W White 2.1 100 120 1.2 1.0 390 235 55 60 65 105
AN160 B Black 2.1 100 160 1.5 1.3 490 340 55 60 155 175
AN200 B Black 2.1 100 200 2.1 1.6 630 500 60 60 195 245
AN300 B Black 2.1/4.2 50 300 3.0 2.4 1170 980 60 60 245 290
AN400 B Black 2.1/4.2 50 400 4.0 3.0 1370 1170 60 60 340 390 800
AN500 B Black 2.1/4.2 50 500 5.0 4.2 1765 1470 60 60 440 535 1000
AN800 B Black 2.1/4.2 50 800 6.5 5.0 2940 2645 60 60 585 585 1300
AP080 B Black 2.1 100 80 0.6 0.6 195 145 35 40 85 85
AP110 B Black 2.1 100 110 1.0 1.0 290 245 35 40 125 125

* MD(machine direction)/*CD(cross direction)
* The measurement method shall comply with the following.

Tensile strength/tensile elongation: JIS L-1908
Tearing strength: JIS L-1096 (single tongue method)
Burst Strength: ASTM D 4833
Water permeability coefficient: JIS A-1218

Thickness (1): JIS L-1096 (pressure 7g/cm²)
Thickness (2): JIS L-1908 (pressure 20g/cm²)
The AN types are hydrophilically treated.