UNITIKA UNITIKA PLASTICS DIVISION
Japanese Chinese
Printing Tips
Nylon Resin U-polymer TERRAMAC Unilate Elitel
Nylon6
Grade List
General
Properties
Mechanical
Properties

Electrical
Properties

Environmental
Properties
Water
Absorption

Weather
Resistance

Thermal
Degradation

Chemical
Resistance

Molding
Condition


Nano-Composite Nylon6
RUN Series
 
Nylon66
 
Applications
 
Contact Us
NylonResin > Nylon6 > Grade List   Top Page
[UNITIKA Nylon Resin] Nylon6

Grade List

UNITIKA Nylon 6 Grade List
Detailed data are available in PDF file.
Type
Grade
Viscosity
Application
Description
Standard
 A1020BRL
Ultra low-viscosity
Injection
 
 A1030BRL
Medium viscosity
Injection
 
 A1030BRF
Medium to
high viscosity
Injection
 
 A1030BRT
High-viscosity
Injection & extrusion
 
 M1040
Ultrahigh-viscosity
Extrusion & blow
 
High cycle
 A1030JR
Low-viscosity
Injection
Microcrystalline type, high toughness
 A1030SR
Medium viscosity
Injection
High toughness
 A1030FR
Medium to
high viscosity
Injection
High impact strength, high toughness
 A1030R
Low-viscosity
Injection
Microcrystal type, high toughness, deep-molding, good printability
Glass fiber-reinforced
 A1022GFL15
Low-viscosity
Injection
15% Glass fiber-reinforced,
high flowability
 A1022GFL
Low-viscosity
Injection
30% Glass fiber-reinforced,
high flowability
 A1030GFL
Medium viscosity
Injection
30% Glass fiber-reinforced
 A1030GFL45
Medium viscosity
Injection
45% Glass fiber-reinforced,
High strength
 A1022GFL60(A)
Low-viscosity
Injection
60% Glass fiber-reinforced,
high flowability, high-rigidity
(Good appearance)
 EX-8406G30
Medium viscosity
Injection
30% Glass fiber-reinforced,
high-impact
Heat-resistant
 A1030SR(S)
Medium viscosity
Injection
High toughness (heat-resistant)
 A1022GFL(S)
Low-viscosity
Injection
30% Glass fiber-reinforced,
high flowability (Heat-resistant)
Inorganic-fillered
 A3130
Medium viscosity
Injection
35% Inorganic-reinforced
 A3130HR-25
Low-viscosity
Injection
25% Inorganic-reinforced, good appearance
 A3030N-2
Medium viscosity
Injection
30% Inorganic-reinforced,
UL94 V-2 approved
Warping-resistant,
high-rigidity
 RUN35-C25
Low-viscosity
Injection
High rigidity (15 GPa), warping resistance, good appearance
Flame-resistant
 A1025NO
Low-viscosity
Injection
Nonreinforced, UL94 V-0 approved
 A1025GO
Low-viscosity
Injection
30% Glass fiber-reinforced
UL94 V-0, UL746 A approved
Lubricant
 A1030TF
Medium viscosity
Injection
Fluoroplastic-added
 A1030M
Medium viscosity
Injection
Molybdenum disulfide-added
 A1030L15
Medium viscosity
Injection
Lubricant-added
Electrically
conductive
 EX-1020K
Medium viscosity
Injection
Volume resistance: 10Ωm
High-impact
 EX-1222
Medium viscosity
Injection
High impact strength,
low-temperature resistance
 EX-1030
High-viscosity
Injection & extrusion
Ultrahigh impact strength,
low-temperature resistance
Nanocomposite
 M1030DH
Medium viscosity
Injection
Sink mark-prevented,
warping resistance, low density,
and heat rigidity

Special Nylon Grade List
Detailed data are available in PDF file.
Type
Grade
Viscosity
Application
Description
Transparent
 CX-2500
Medium viscosity
Injection
Amorphous specialty polyamide
Powder*
 A1020LP
Low-viscosity
10 to 170 meshes
* Inquire separately about the powder resins.