UNILATE™ Conductive type: CV
Key Features
1. Superior Conductivity
The surface resistivity is 104-8Ω.
2. High Dimensional stability and rigidity
PET, the main component of UNILATE, makes this material superior to others in dimensional stability and water absorption.
UNILATE is also very rigid by reinforcing with glass fiber fillers.
3. Less Warpage
Little warpage is observed during use because of our propriety composition design and manufacturing technology.
Properties
| Item (*) | Test Method (ASTM) |
Unit | UNILATE CV (Conductive type) |
UNILATE PC (Standard type) |
|
|---|---|---|---|---|---|
| Density | ASTM D792 | — | 1.56 | 1.63 | |
| Combustibility | UL94 | — | HB equivalent | HB (0.6mm~) | |
| Flexural strength | MD | ASTM D790 | MPa | 328 | 220 |
| TD | 134 | 125 | |||
| Flexural modulus | MD | ASTM D790 | GPa | 16.8 | 11.0 |
| TD | 5.9 | 7.0 | |||
| Deflection temperature under load (0.45MPa) |
ASTM D648 | °C | 221 | 235 | |
| Surface resistivity | ASTM D257 | Ω | 104〜108 | 1015 | |
| Liner expansion coefficient | MD | ASTM D696 | 10-5/°C | 0.5 | 4.0 |
| TD | 8.5 | 7.4 | |||
| Water Absorption | ASTM D570 | % | under 0.01 | 0.1 | |
*The information in this document is based on laboratory testing and not intended to guarantee any particular properties.
Product list
| Type- thickness (unit:mm) |
color | Specification code |
Standard dimensions (mm×mm) |
Minimum packaging unit |
|---|---|---|---|---|
| CV-5 | B | 0 | 1000×1000 | 2sheets |
| CV-10 | B | 0 | 1000×1000 | 2sheets |
| CV-15 | B | 0 | 1000×1000 | 1sheet |
| CV-20 | B | 0 | 1000×1000 | 1sheet |
| CV-30 | B | 0 | 1000×1000 | 1sheet |
Product list(annealed)
We recommend the annealed products for the applications where high dimensional stability is required at temperature over 80°C.
| Type- thickness (unit:mm) |
color | Specification code |
Standard dimensions (mm×mm) |
Minimum packaging unit |
|---|---|---|---|---|
| CVA-5 | B | 0 | 1000×1000 | 2sheets |
| CVA-10 | B | 0 | 1000×1000 | 2sheets |
| CVA-15 | B | 0 | 1000×1000 | 1sheet |
| CVA-20 | B | 0 | 1000×1000 | 1sheet |
| CVA-30 | B | 0 | 1000×1000 | 1sheet |
* All annealed products are made-to-order.
* CV and CVA types should be shaved off the surface by at least 50µm before using.
* Specification code means tolerance of thickness. All CV type is +α thickness with reference to standard thickness.
Application
Suction part of Silicon wafer, Assemble parts for electronics, Manufacturing Jig.