Civil Engineering Materials

Industrial Waste Final Disposal Site

Industrial Waste Final Disposal Site

These are light-blocking protective mats we have developed for use in Industrial Waste Final Disposal Site by leveraging the features of Needle Punched MARIX. The mats are superior not only in strength and weather resistance but in elongation, cushioning property, and light-blocking performance as well. They are used as protective buffering materials that can protect against even deformed protrusions.
LN650 and L1500 are three-layer mats that use a polyethylene laminated layer on the top surface and ELEVES (polyethylene sheath and polyester core) on the rear surface, which can be bonded together using a self-propelled hot wind pressure welding machine. Their bonding performance is excellent.

Industrial Waste Final Disposal Site

Standard properties

Item No. Weight
(g/m²)
Tensile
strength
(N/cm)
Burst Strength
(N)
Weather
resistance
(N (*1))
Shading
rate
(%)
Safety level
LN650/PAL 650 300 or more 1000 or more 800 or more 100 Below the limits specified in environmental quality
standards for groundwater and water quality
L1500/PNL 1500 100 or more 1500 or more 1000 or more 100
AS500/GRE 500 300 or more 900 or more 750 or more 100
AN500/BKE 500 300 or more 900 or more 600 or more 99 or more
Measurement
method
JIS-L-1908 JIS-L-1908 ASTM D 4833 ASTM D 4833 JIS-L-1055

(1*) Burst Strength after the WS-type accelerated exposure test (JIS-A-1415, 1000 hr)

Specification

Item No. Specification Water
permeability
Flame
resistance
Self-propelled
hot wind
pressure
welding
machine
Structure
Color Width
(m)
Roll
length
(m)
Top
surface
layer
Middle
layer
Rear
surface
layer
LN650/PAL Green 2.1 50 Not supported Supported Usable Polyethylene PET Spunbond
nonwoven
ELEVES
L1500/PNL Green 2.1 30 Not supported Supported Usable Polyethylene PET Staple
nonwoven
ELEVES
AS500/GRE Green 2.05 or 4.1 50 Supported Supported Not usable Acrylic resin PET Spunbond
nonwoven
AN500/BKE Black 2.1 or 4.2 50 Supported Not supported Not usable PET Spunbond
nonwoven
Measurement
method
JIS-A-1218 45° air mix burner method

Gas-Permeable/Waterproof Sheet (ELEVES as Capping Sheet) (CP600)

image3

When a final repository site is closed, the use of the capping method is required that can prevent rain water from permeating the waste and ensure safe waste confinement in order to reduce the risk of seepage water contaminating the environment as well as the cost of seepage water disposal. We have developed a new type of capping sheet jointly with the Society for Research on Geosynthetics Technology. This capping sheet features a seepage control function that prevents rain water permeation and a gas permeability property that lets residue gases generated from waste pass through to the atmosphere while at the same time satisfying the physical performance requirements that need to be met during construction and use.
Made of ELEVES (polyester/polyethylene core-sheath structure), the capping sheet has superb thermal adhesiveness and is suitable for bonding by means of a self-propelled hot wind pressure welding machine. In addition, applying heat and pressure to edges makes bonded parts water repellent.

Standard properties

Item No. Mass
(g/m²)
Thickness
(mm)
Tensile strength
(N/5cm)
Elongation
(%)
Tearing strength
(N)
Burst Strength
(N)
Water resistance
(kPa)
Humidity
permeability
(g/m².24h)
*MD *CD *MD *CD *MD *CD
CP600 600 4.5 1200 925 60 60 185 220 600 220 3000

* MD(machine direction)/*CD(cross direction)
<Measurement method>

Mass/thickness/tensile strength/elongation: JIS L-1908
Tearing strength: JIS L-1096
Burst Strength: ASTM D 4833

Water resistance: High hydraulic method JIS L 1092
Humidity permeability: A-1 method JIS L 1099