Top Page > Products > RESIN > Products List & Properties
Grade List
Application Grade Characteristics Applications BPS positive list No.
Injection
TE-2000
Standard, transparent
Smaller goods, containers,
various plastic parts, etc.
C00395
TE-1030
High-impact
C00316
TE-1070
Flexible and high-flow
C00316
TE-7000
High heat resistance,
low density
Containers, table wear,
chassis, etc.
C00292
TE-7307
High heat resistance,
high-rigidity
C00292
TE-7300
High heat resistance,
high-rigidity
C00292
TE-8210
High heat resistance,
durability, high-rigidity
C00317
TE-8300
High heat resistance,
durability, high-rigidity
C00317
Extrusion,
blow, and
foam
TP-4000
Improved melt properties
Containers, bottles, pipes,
Foam sheet, etc.
C00315
TP-4030
Improved melt properties,
high-impact
C00315
HV-6250H
Improved melt properties
C00319

Properties
<Injection grades>
Item
Test method
ISO Unit Basic grade
TE-2000
High-
impact
grade
TE-1030
High-
impact
grade
TE-1070
Heat-
resisting
grade
TE-7000
Heat-
resisting
grade
TE-7307
Heat-
resisting
grade
TE-7300
High-
durability
grade
TE-8210
High-
durability
grade
TE-8300
Appearance
- - Tran
sparent
Opaque
white
Opaque
white
Opaque
white
Opaque
white
Opaque
white
Opaque
white
Opaque
white
Density
1183 - 1.25 1.24 1.24 1.27 1.42 1.47 1.42 1.47
Melting point
- °C 170 170 170 170 170 170 170 170
Breaking
strength
527 MPa 63 51 34 70 54> 54 50 56
Tensile
elongation
527 % 4 170 200< 2 2 1 2 1
Bending
strength
178 MPa 106 77 50 110 85 98 90 104
Bending
modulus
178 GPa 4.3 2.6 1.4 4.6 7.5 9.5 6.8 9.3
Charpy impact
strength:
With notch
179 kJ/m² 1.6 2.3 5.6 2.0 2.5 2.4 4.0 2.8
Deflection
temperature
under
load of 0.45 MPa
75 °C 58 51 54 110 120 140 120 140
Molding shrinkage
- % 0.3∼0.5
0.3∼0.5 0.3∼0.5 1.0∼1.2 1.0∼1.2 1.0∼1.2 1.0∼1.2 1.0∼1.2
* The data above are typical values of test pieces determined by our tests,
and are not intended to guarantee the properties of resins in a particular application.

<Extrusion, blow, and foam sheet grades>
Item
Test method
ISO Unit Basic grade
TP-4000
Soft
TP-4030
Foam
HV-6250H
Appearance
- - Tran
sparent
Opaque
white
Opaque
white
Density
1183 - 1.25 1.24 1.27
Melting point
- °C 170 170 170
Breaking
strength
527 MPa 66 50 69
Tensile
elongation
527 % 5 44 2
Bending
strength
178 MPa 108 71 111
Bending
modulus
178 GPa 4.6 2.4 4.7
Charpy impact
strength:
With notch
179 kJ/m² 1.6 2.6 1.9
Deflection
temperature under
load of 0.45 MPa
75 °C 59 52 120*1
Molding shrinkage
190°C
2.16kg
g/10min 3∼5 3∼5 1∼3
* The data above are typical values of test pieces determined by our tests,
and are not intended to guarantee the properties of resins in a particular application.
*1 This data is a temperature shown in molding at a predetermined die temperature(110°C).
In molding with a die of a lower temperature, the temperature is approx. 60°C.