Machining Conditions of UNILATE™
Cutting conditions
Machining method | Examples of machining conditions | |
Cutting | Tool Revolution (rpm) Feed rate (mm/min) |
Carbide chip-saw 4,000 to 4,500 2,500 to 3,500 |
Milling End milling |
Tool Revolution (rpm) Feed rate (mm/min) |
Carbide chip/carbide end mill 500 to 5,000 200 to 500 |
Drilling | Tool Revolution (rpm) Feed rate (mm/min) |
Carbide drill 1,000 (10φ) 300 to 400 |
Lathing | Tool Revolution (rpm) Feed rate (mm/min) |
Carbide chip 1,000 (10φ) 300 to 400 |
* The above conditions may vary with machining tools and blades.
Punching conditions:
- 1. Designate a hardened die.
- 2. Set a clearance of about 5/100 on one side.
- 3. Set a thickness to be punched up to 2 mm.
- 4. Make sure that the minimum punching diameter and the distance between holes are larger than the thickness.