Physical properties table
[Homogeneous type]
| Grade | Item | Specific Gravity | IV Value | b Value | Melting Point | Tensile Yield Strength | Tensile Elongation | Flexural Strength | Flexural Modulus | Izod Impact Test |
|---|---|---|---|---|---|---|---|---|---|---|
| Unit | — | — | — | ℃ | MPa | % | MPa | GPa | J/m | |
| ASTM | D792 | — | — | — | D638 | D638 | D790 | D790 | D256 | |
| SA-1206 | 1.41 | 1.07 | 1.8 | 251 | 52 | 260< | 80 | 2.3 | 36 | |
| NEH-2070 | 1.41 | 0.88 | 1.5 | 250 | 51 | 260< | 81 | 2.3 | 34 | |
| NEH-2050 | 1.41 | 0.78 | 0.5 | 252 | 53 | 260< | 81 | 2.3 | 36 | |
| NES-2040 | 1.41 | 0.72 | 0.7 | 251 | 54 | 260< | 81 | 2.3 | 36 | |
| MA-2103 | 1.34 | 0.68 | 5.5 | 255 | 53 | 260< | 82 | 2.3 | 36 | |
| MA-2101M | 1.34 (amorphous) |
0.62 | 5.5 | 255 | 53 | 260< | 82 | 2.3 | 32 | |
[Copolymerization type and special grades]
| Grade | Item | Specific Gravity | IV Value | b Value | Melting Point | Tensile Yield Strength | Tensile Elongation | Flexural Strength | Flexural Modulus | Izod Impact Test |
|---|---|---|---|---|---|---|---|---|---|---|
| Unit | — | — | — | ℃ | MPa | % | MPa | GPa | J/m | |
| ASTM | D792 | — | — | — | D638 | D638 | D790 | D790 | D256 | |
| SA-863JP | 1.40 | 1.18 | -1.5 | 235 | 51 | 200< | 83 | 2.4 | 42 | |
| SA-8639P | 1.40 | 1.13 | -1.1 | 236 | 52 | 200< | 84 | 2.4 | 40 | |
| SA-8339P | 1.40 | 1.13 | -1.0 | 235 | 59 | 200< | 92 | 2.2 | 34 | |
| MA-8633P | 1.40 | 0.68 | -1.5 | 230 | 53 | 200< | 85 | 2.5 | 38 | |
| SA-1325P | 1.39 | 0.80 | 1.5 | 240 | 53 | 200< | 82 | 2.3 | 36 | |
| MA-8334P | 1.38 | 0.74 | -1.8 | 230 | 57 | 200< | 91 | 2.6 | 34 | |
| MA-1340P | 1.38 | 0.57 | 1.0 | 231 | 52 | 200< | 67 | 2.3 | 26 | |
| MA-6101-3 | 1.34 (amorphous) |
0.64 | 0.8 | 255 | 52 | 200< | 82 | 2.3 | 36 | |
(Updated on February 5, 2019)
Note: The above figures are typical values obtained by Unitika using specified measurement methods and are not guaranteed values.