Specifications and properties
Main applications and applicable Item No.
| Location | Construction method | AN060 | AN120 | AN160 | AN200 | AN300 | AN400 | AN500 | AN800 | AP080 | AP110 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Port and Harbor Works | Prevention of soil draw-out for embankment |
○ | ○ | ○ | ○ | ||||||
| Prevention of scouring for wave dissipating blocks, etc |
○ | ○ | ○ | ||||||||
| River | Levee erosion prevention | ○ | ○ | ○ | |||||||
| Riverbed erosion prevention | ○ | ○ | ○ | ||||||||
| Drained lands /landfills /developed lands |
Soft ground stabilization and trafficability |
○ | ○ | ○ | ○ | ||||||
| Horizontal drain for embankment |
○ | ○ | ○ | ||||||||
| Underdrainage | ○ | ○ | ○ | ○ | |||||||
| Roads/sidewalks | Embankment on soft grounds | ○ | ○ | ○ | ○ | ||||||
| Blocking layer | ○ | ○ | ○ | ||||||||
| Horizontal drain for embankment |
○ | ○ | ○ | ||||||||
| Crack prevention for overlay construction method |
○ | ||||||||||
| Separation for water permeable pavement |
○ | ○ | ○ | ||||||||
| Filter for underground seepage method |
○ | ○ | ○ | ○ | |||||||
| Agricultural lands /cultivated lands |
Drainage channel erosion prevention |
○ | ○ | ○ | ○ | ||||||
| Farm roads | ○ | ○ | ○ | ||||||||
| Ground construction | Water permeability coefficient | ○ | ○ | ○ | |||||||
| Golf courses | Soil layer separation and horizontal drainage. |
○ | ○ | ○ | ○ | ○ | |||||
| Waste repository sites /dams/reservoirs |
Seepage control layer protection and reverse surface drainage |
○ | ○ | ○ | ○ | ○ | |||||
| Block lining erosion prevention |
○ | ○ | |||||||||
| Developed lands /roads |
Base materials for temporary diversion channels |
○ | ○ | ||||||||
| Railways | Protective materials for mud- pumping preventing method and drainage materials |
○ | ○ | ○ |
Properties [catalog values]
| Item No. | Specification | Weight (g/m²) |
Thickness (1) (mm) |
Thickness (2) (mm) |
Tensile strength (N/5cm) |
Elongation (%) |
Tearing strength (N) |
Water permeability coefficient (cm/sec) |
Burst Strength (N) |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Color | Width (m) |
Roll length (m) |
*MD | *CD | *MD | *CD | *MD | *CD | Vertical direction |
Horizontal direction |
|||||
| AN060 W | White | 1.05/2.1 | 100 | 60 | 0.7 | 0.5 | 140 | 85 | 55 | 60 | 60 | 60 | 1×10-1 | 5×10-1 | – |
| AN120 W | White | 2.1 | 100 | 120 | 1.2 | 1.0 | 390 | 235 | 55 | 60 | 65 | 105 | – | ||
| AN160 B | Black | 2.1 | 100 | 160 | 1.5 | 1.3 | 490 | 340 | 55 | 60 | 155 | 175 | – | ||
| AN200 B | Black | 2.1 | 100 | 200 | 2.1 | 1.6 | 630 | 500 | 60 | 60 | 195 | 245 | – | ||
| AN300 B | Black | 2.1/4.2 | 50 | 300 | 3.0 | 2.4 | 1170 | 980 | 60 | 60 | 245 | 290 | – | ||
| AN400 B | Black | 2.1/4.2 | 50 | 400 | 4.0 | 3.0 | 1370 | 1170 | 60 | 60 | 340 | 390 | 800 | ||
| AN500 B | Black | 2.1/4.2 | 50 | 500 | 5.0 | 4.2 | 1765 | 1470 | 60 | 60 | 440 | 535 | 1000 | ||
| AN800 B | Black | 2.1/4.2 | 50 | 800 | 6.5 | 5.0 | 2940 | 2645 | 60 | 60 | 585 | 585 | 1300 | ||
| AP080 B | Black | 2.1 | 100 | 80 | 0.6 | 0.6 | 195 | 145 | 35 | 40 | 85 | 85 | – | ||
| AP110 B | Black | 2.1 | 100 | 110 | 1.0 | 1.0 | 290 | 245 | 35 | 40 | 125 | 125 | – | ||
* MD(machine direction)/*CD(cross direction)
* The measurement method shall comply with the following.
Tensile strength/tensile elongation: JIS L-1908
Tearing strength: JIS L-1096 (single tongue method)
Burst Strength: ASTM D 4833
Water permeability coefficient: JIS A-1218
Thickness (1): JIS L-1096 (pressure 7g/cm²)
Thickness (2): JIS L-1908 (pressure 20g/cm²)
The AN types are hydrophilically treated.